F10513 - 3.2.962

Rubrik: SoftService Installer - Features

 

 

Der PEClient wurde um alle notwendigen Funktionen erweitert, die zur vollständigen Dualboot Installation gebraucht werden. Nachfolgend die getestete Konfiguration.

[DualBoot]
dual_partition._COPYSECTION_=dual_partition_%CurrentOS%
Partition_WinPE_Custom._COPYSECTION_=Partition_WinPE_Custom_%CurrentOS%

[dual_partition_1]
MAX1=1,15000,NTFS,COMPANY,DEFAULT
MAX2=1,15000,NTFS,PRIVAT,DEFAULT
MAX3=1,max,NTFS,DATA,DEFAULT
DiskSize=2000

[dual_partition_2]
IgnorePartEntrys=Yes
InstPart=1

[Partition_WinPE_Custom_1]
;Clear all existing drive letter
"WinPEDiskPart.sba" = "Mode:=CLEAR_LETTER, Disk:=0, Part:=1, Target:=C"
"WinPEDiskPart.sba" = "Mode:=CLEAR_LETTER, Disk:=0, Part:=2, Target:=D"
"WinPEDiskPart.sba" = "Mode:=CLEAR_LETTER, Disk:=0, Part:=3, Target:=E"

;Apply new partition layout
"WinPEDiskPart.sba" = "Mode:=SET_TYPE, Disk:=0, Part:=1, Target:=PARTITION_NTFS_HIDDEN"
"WinPEDiskPart.sba" = "Mode:=SET_TYPE, Disk:=0, Part:=2, Target:=PARTITION_NTFS"
"WinPEDiskPart.sba" = "Mode:=SET_TYPE, Disk:=0, Part:=3, Target:=PARTITION_NTFS_HIDDEN"

;assign new drive letters
"WinPEDiskPart.sba" = "Mode:=SET_LETTER, Disk:=0, Part:=2, Target:=C"

;activate boot partition
"WinPEDiskPart.sba" = "Mode:=SET_ACTIVE, Disk:=0, Part:=2"

[Partition_WinPE_Custom_2]
;Clear all existing drive letter
"WinPEDiskPart.sba" = "Mode:=CLEAR_LETTER, Disk:=0, Part:=2, Target:=C"

;Apply new partition layout
"WinPEDiskPart.sba" = "Mode:=SET_TYPE, Disk:=0, Part:=1, Target:=PARTITION_NTFS"
"WinPEDiskPart.sba" = "Mode:=SET_TYPE, Disk:=0, Part:=2, Target:=PARTITION_NTFS_HIDDEN"
"WinPEDiskPart.sba" = "Mode:=SET_TYPE, Disk:=0, Part:=3, Target:=PARTITION_NTFS"

;assign new drive letters
"WinPEDiskPart.sba" = "Mode:=SET_LETTER, Disk:=0, Part:=1, Target:=C"
"WinPEDiskPart.sba" = "Mode:=SET_LETTER, Disk:=0, Part:=3, Target:=D"

;activate boot partition
"WinPEDiskPart.sba" = "Mode:=SET_ACTIVE, Disk:=0, Part:=1"

 

---